Atmel USB Devices Driver
- Atmel Usb Devices Driver Win 7
- Atmel Driver Download
- Atmel Usb Driver Download
- Atmel Usb Driver Windows 10
Atmel Usb Devices Driver Win 7
The ATMEL USB FastVNET (A3) modem drivers have to be installed for the device to give satisfactory output. They can be downloaded from the manufactures website if not issued with purchase of the device. With proper installation, the user is assured of complete output satisfaction and task accomplishment. I'm trying to have USB CDC working on a SAM4E. In my previous board, I used a SAM3X and it was working perfectly. The difference is that the SAM3X uses the ASF UOTGHS driver, while SAM4E uses the ASF UDP driver. It works for some actions, but not all. For example, I see correctly a COM port on my computer. I can connect to it. Atmel USB DFU Programmer A command-line programmer for Atmel USB microcontrollers. Extracted from the firmware on 1. Found it does not installed folder libusb-win32 devices. Driver signed by Atmel Norway, version 1.2.2.0 dating back to 2010. UNO sing the command lines above.
Problem:
I have a Studio V7 with a ICE Mk II and mega2560 with a squid cable running fine for years on win 10.
I bought a second new smaller AT-ATMEL-ICE. I disconnected the 10 pin female IDC with squid and moved it to the new small ICE adapter board, and pointed Studio/project/tools to it.
- Connect the locator via the USB port and Turn on the locator and a Bossa driver(or some other USB device) will appear. “Right click” on this driver and select “Update driver software” Select “Browse my computer for driver software” Select “Let me pick from a list” Select the “atml6124 driver.
- The USB CDC driver files can be found in the Atmel Software Framework. It can be extracted either from a USB CDC Example project opened from the Atmel studio or available with the ASF standalone package. In Atmel studio opening a new USB CDC example project will automatically generate the driver files in the project directory.
Both MK II and ICE are to used with the JTAG interface for advanced debug over an ISP interface.
The new ICE failed to work !!!
Studio gave message 'Failed to launch program', 'Error: Target power not connected. Altium usb devices driver windows 7. Debugger command setParameter failed'.
The ICE showed it had power(center red LED on) and the target had power (left Green LED on). obviously the squid was connected properly.
A double check of the squid (unchanged for years) showed pin 4 VTG was connected to VCC as required for Mega2560. VCC measured by voltmeter showed 4.97 V close enough to 5.00V !
If you have this problem, double check VGT like I did. These 3 observation are in direct conflict with the printed Studio V7 error message, which is miss leading as to fault. VTG is used by ICE to program the target micro at it's required proper voltage by ICE.
Solution:
I first removed Visual Micro extension from Studio 7. not certain this was necessity but it was installed after Mk II and before ICE.. it is perhaps too conservative.
Next you MUST unplug all Atmel manufactured devices form USB to win 10 PC. This was JTAG-Mk II ICE and Atmel-ICE. MOST IMPORTANT STEP. during the following StudioV7 re install, if anything Atmel is USB connected to PC, the required driver will not be installed properly Uutomatically.
Use Win 10 / Settings / Apps and uninstall all Atmel Apps, yes all of them
Restart win 10
Be sure all Atmel ICE(s) are unplugged from USB ports.. so important !!
Go to Atmel web and down load Studio V7 and install it.
Run Studio 7.
My ATMEL-ICE was just purchased by me, even so the date of manufacture was a year ago (bought from element14).
A window popped up and said 'updating ICE firmware', wow I felt progress! the driver was found because the PC was talking to the ICE.
I opened the solution that I was working with old Mk II with the new ICE attached and it worked.. / Debug / 'Start_Debug_and_Break' and executed it. It worked
Note:
The ATATMEL-ICE manual says to look at windows device manager (File Explorer then 'This PC'. right click..Device Manager.. Human Interface Devices . and should see the Atmel device listed in HID. this did not happen for me. but if you count the number of HID device in the list, one more will appear and then disappear as you USB connect and then disconnect to PC the ATMEL ICE.
I spent a day of time searching for a solution, as well as calls to tech support at Newark. I hope this helps someone with the Atmel Studio V7 error message unrelated to the real issue !
ED
Niwot_Dude
ISPnub - Stand-alone AVR programmer module
Like it? You can support via PayPal:
Atmel Driver Download
Features
Atmel Usb Driver Download
- Works under multiple platforms. Linux, Mac OS X and Windows are tested.
- No special controllers or smd components are needed.
- Programming speed is up to 5kBytes/sec.
- SCK option to support targets with low clock speed (< 1,5MHz).
Download
Firmware and circuit
The following packages include circuit and firmware.usbasp.2011-05-28.tar.gz (519 kB) TPI support, supports programmers with ATMega88 and ATMega8.
usbasp.2009-02-28.tar.gz (260 kB)
Atmel Usb Driver Windows 10
usbasp.2007-10-23.tar.gz (172 kB)usbasp.2007-07-23.tar.gz (176 kB)
usbasp.2006-12-29.tar.gz (118 kB) Supports programmers with ATMega48 and ATMega8.
usbasp.2006-09-16.tar.gz (116 kB) New VID/PID!
usbasp.2005-11-14.tar.gz (175 kB)
usbasp.2005-07-03.tar.gz (166 kB)
usbasp.2005-04-21.tar.gz (169 kB)
Please refer to Readme.txt for details on building, installing and using USBasp.
Drivers
On Linux and MacOS X no kernel driver is needed. Windows requires a driver for USBasp. Please use this driver installation tool for Windows (see also: successful setup on Windows 10):Zadig - USB driver installation made easy
Software
- AVRDUDE supports USBasp since version 5.2.
- BASCOM-AVR supports USBasp since version 1.11.9.6.
- Khazama AVR Programmer is a Windows XP/Vista GUI application for USBasp and avrdude.
- eXtreme Burner - AVR is a Windows GUI Software for USBasp based USB AVR programmers.
Hardware
Schematic
Partlist
| Partnumber | Value | Reichelt No |
|---|---|---|
| C1 | 4,7u | RAD 4,7/35 |
| C2 | 100n | X7R-5 100N |
| C3, C4 | 22p | KERKO 22P |
| D1, D2 | 3V6 zener | ZF 3,6 |
| CON1 | USB-B | USB BW |
| CON2 | 10pol | WSL 10W |
| IC1 | ATmega8-16 | ATMEGA 8-16 (not programmed!) |
| JP1, JP2 | 2pol 2,54mm | SL 1X36G 2,54 |
| LED1 | 3mm LED green | LED 3MM 2MA GN |
| LED2 | 3mm LED red | LED 3MM 2MA RT |
| Q1 | 12Mhz | 12,0000-HC49U-S |
| R1, R2 | 68 | 1/4W 68 |
| R3 | 2,2k | 1/4W 2,2k |
| R4, R5, R6, R7 | 270 | 1/4W 270 |
| R8 | 10k | 1/4W 10k |
| R9, R10 | 1k | 1/4W 1k |
| M1, M2 | Jumper | JUMPER 2,54GL SW |
| M3 | Socket 28S | GS 28-S |
| M4 | Case | TEKO 10007 |
| M5 | PCB | - |
User PCB layouts
Here is a list of tested PCB layouts. If you have designed your own PCB, please let me know.| usbasp_single_side.t3001.zip by Thomas Fischl Single-Side PCB, TARGET 3001! layout file Size: 90x40 mm (optimized for case Hammond 1591ATBU) | |
| lv_usbasp.tar.gz by Pawel Szramowski (11/2007) With Low-voltage front-end. Single-Side PCB, EAGLE layout files, some SMD components | |
| by Bernhard Walle Double-Side PCB, EAGLE layout files, part list with order numbers for Reichelt.de and Conrad.de Size: optimized for case Hammond 1591ATBU | |
| http://thomaspfeifer.net/atmel_usb_programmer.htm by Thomas Pfeifer Single-Side PCB, PDF layout files, SMD components | |
| by Tomasz Ostrowski Single-Side PCB, PDF and EPS layout files, only four 0805 SMD parts, rest discrete components | |
| USBasp_CH.zip by Christian Heigemeyr Single-Side PCB, with some SMD 0805 components, PDF-files With additional buttons for reset and disconnection of the target | |
| USBasp.sch, USBasp.pcb ComponentSide.pdf, TopSide.pdf, Schematics.pdf by Zhurov Pavel Single-Side PCB, P-CAD 2002 format and PDF files Crosspiece TXD and RXD are added for the ISP connector | |
| usbasp_gr.rar by J.A. de Groot The board is single sided (EAGLE format), measures 3 by 8 cm and uses only regular components. | |
| usbasb_mg.zip by Matthias Görner Single-Side PCB, eagle-format, with PS/PDF-files integrated sockets for target chips ATmega8 and ATmega32 | |
| Tarball with layout by Hannes Östlund Doubleside-Side PCB, SMD components, very small | |
| by Sergiy Bogdancev (01/2010) 3.3V version, ATMega48 only. Single-side PCB, ExpressPCB layout format + socket board for varies AVRs. Without future serial interface, chip initially must be programmed with another programmer. | |
| Eaglefiles (sch/brd) and CAD case design (dxf) by Hans Hafner, HTL Mössingerstrasse-Klagenfurt, Österreich, hans.hafner (at) htl-klu (dot) at (01/2010) CNC-milled case (DXF file available), Eagle layout, only a few SMD parts | |
| Different USBasp versions: Easy to built non-smd, smd version and a very small USBasp by Sven Hedin (01/2011) Eagle files available. | |
| USB Key AVR Programmer by Fabio Baltieri (09/2011) Very small USB key like dimensions. SMD parts. | |
| AVR ISP Programmer by Jaroslav Vadel (04/2012) Small programmer. SMD parts. | |
| Target project and PDFs (layout/schematics) by Marius Schäfer (09/2013) | |
| tinyUSBboard with USBasp-compatible firmware by Stephan Bärwolf (04/2014) | |
| USBasp on breadboard with socket for controller daughter boards. by Fabian Hummel (11/2018) | |
| Tjaart van Aswegen designed an SMD board: DIP TRACE and GERBER files. by Tjaart van Aswegen (09/2019) | |
| Feature rich (e.g. different voltage levels, integrated USB to serial converter, USB-C connector) USBasp compatible design. AVR Programmer Github project. by Brian Pepin (12/2019) | |
| USBasp with ZIF socket and through hole components. KiCad design on Github by Bruno (04/2020) | |
| USBasp board with additional 6pin header and selectable target supply (3.3V/off/5.0V). by Marty E. (10/2020) | |
| John included a 40 pin universal socket which takes 8, 14, 20 and 28 pin devices. He also added a versatile crystal oscillator with outputs of 1, 2, 4, 8 and 16 Mhz to clock the chips. There is also the standard 6pin ICSP connector and a user led connected to the MOSI pin. by John P. (11/2020) |
Links
http://www.obdev.at/products/avrusb/ Firmware-only AVR USB driverhttp://libusb.sourceforge.net/ libusb
http://libusb-win32.sourceforge.net/ LibUsb-Win32
http://www.nongnu.org/avrdude/ AVRDUDE - AVR Downloader/UploaDEr