Printers and Printing Devices

1. Drivers Bleile Datentechnik Port Devices Gigabit
2. Drivers Bleile Datentechnik Port Devices Inc

If you need to print from your palmtop, there are a number of possibilities. First, if you are using a fax program on your palmtop, you may consider faxing your document to a fax machine nearby. Other than that, we can offer several other solutions for your printing needs.

The power of the serial port can be controlled by the built-in program serctl. Type in (or use in a batch file) serctl /w to switch the serial port on and set it to 'wired' and use serctl /o to switch the port off again. Serctl /i switches the port on and sets it to use the IR interface instead of the wired port. The TransPC card is a PCMCIA card with a full-featured parallel port. It allows parallel devices like printers, ZIP drives and others to be connected to the palmtop. The card comes complete with driver software, parallel cable and user's manual. LitePrint Infrared Printer Adapter.

Driver for CAN-Bus. For the CAN-Bus which is especially popular in the automotive industry a BORIS driver is available, at first for the large range of PC-CAN interfaces from the PEAK-System company in Darmstadt. The driver enables the comfortable signal configuration and the reading and writing of any signals. The USB ID Repository. The home of the usb.ids file. Main- USB Devices. 0 1 2 3 4 5 6 7 8 9 a b c d e f all.

Parallel Printer Cable

This cable is used to print directly from the HP palmtop to a parallel printer. It has a connector for the serial port of the palmtop on one end, and a standard Centronics connector that fits directly into the parallel port of a printer on the other end. The serial/parallel interface is contained in the housing of the connector, and it requires no batteries and no external power supply.

The parallel cables works with all printer models which supply +5V at pin 35 of the Centronics connector. It does not work with CGI printers which require a Windows operating system.

Parallel Printer Adapter

This adapter works pretty much like the Parallel Printer Cable, except that the adapter does not come with an attached cable. Instead, the normal serial cable which is used for data communications between the palmtop and desktop is used to connect the palmtop and the adapter.

The adapter has a 9-pin connector for the serial cable on one end, and a standard Centronics connector that fits directly into the parallel port of a printer on the other end. The serial/parallel interface is contained in the housing of the connector, and it requires no batteries and no external power supply. The parallel printer adapter works with almost all printer models.

Operating instructions for Windows CE 2.0: Set the handheld port for Serial@57600. Some printers require special drivers: If your printer emulates a HP LaserJet III or higher, no driver is required, otherwise BPrint version 2.0 or higher is required for use with Windows CE 2.0. Use of BPrint version 1.6 or lower is not recommended.

TransPC Parallel Card

The TransPC card is a PCMCIA card with a full-featured parallel port. It allows parallel devices like printers, ZIP drives and others to be connected to the palmtop.

The card comes complete with driver software, parallel cable and user's manual.

LitePrint Infrared Printer Adapter

This device replaces the printer cable for any IrDA 1.0-compliant device, like the HP Palmtops, HP OmniBooks and many other notebook computers. The LitePrint adapter can be connected to any parallel port printer, and also supports pass-through printing from the desktop PC so that it actually acts like an intelligent printer switch, accepting data from both the desktop (through the printer cable), and from the palmtop or any other IrDA compliant device (like many notebooks, for example).

The LitePrint adapter has not yet been tested with the HP OmniGo 100 and the Windows CE palmtop PCs.

The package contains the LitePrint adapter, a parallel cable, an AC adapter (220V only), and IrDA drivers for Windows 95, Windows 3.11 and the HP 100/200/700LX palmtops.

Available driver types

The block-oriented simulation system BORIS enables the linkage to real processes via different kinds of hardware drivers. It has to be seperated between two types of hardware:

• PC-internal cards which have direct access to the PC-bus. These cards are especially recommended for time critical problems.
• External hardware modules which communicate with the PC via e. g. the serial RS232- or the parallel interface or USB or Ethernet. This group includes also SPS and bus driven modules.
• Automation systems
• Other drivers…

Please consider that all technical data listed below are based upon specifications given by the concerning distributors and are without liability. The list is updated permanently; so if your type of hardware is not yet included, just call us!

The prices for the drivers depend on the hardware as well as on the number of users. Drivers for modules marked by can be downloaded free of charge from the download area. Please refer to our price lists for current prices of all products!

Drivers for PC-internal cards / USB modules

On request we program drivers for other cards / modules!

Drivers for external modules

We offer ready-to-use drivers for the following hardware modules:

Drivers for modules marked by can be downloaded free of charge from either the German or the English download area.

Drivers Bleile Datentechnik Port Devices Gigabit

Drivers for automation systems and PLC

Driver for CAN-Bus

For the CAN-Bus which is especially popular in the automotive industry a BORIS driver is available, at first for the large range of PC-CAN interfaces from the PEAK-System company in Darmstadt. The driver enables the comfortable signal configuration and the reading and writing of any signals. Our video (German) demonstrates the use of the driver in conjunction with the PCAN-MicroMod Evaluation Kit from PEAK-System.

Drivers for CONRAD digital multimeters

For the digital multimeters MS 9160, 3850 M, 3860 M, 4660 M, GDM 704/705, ME-22, ME-32, ME-42, VC 635, VC 655, VC 350, 4660 A, VC 820 and VC 840 of the company CONRAD-Elektronik low priced BORIS-drivers are available which allow measurement data acquisition, visualization and processing without any programming. Up to four multimeters (depending on the number of COM-ports of the PC) can be operated simultaneously. Details of the multimeters you find on the website of CONRAD-Elektronik.

Videos

Drivers Bleile Datentechnik Port Devices Inc